A toe kick or kickboard (in the kitchen cabinetry sense) is a fascia that fits across the recess at the bottom of a floor-mounted base cabinet; these serve to conceal the plinths / supports of cabinet leg systems.
How to Remove a Toe Kick From Base Cabinets
- Position the end of the pry bar between the top of the quarter-round molding and the toe kick board. Tap the pry bar with a hammer to loosen the molding from the toe kick.
- Find a joint or an end for the toe kick to start prying.
- Loosen the toe kick board across its length.
One may also ask, what is a toe kick in kitchen cabinets? A toe kick is the area between the base cabinet and the floor. It is also referred to as the toe space. A toe kick is the recessed area at the bottom of a base cabinet. Toe kicks are built into bathroom vanities and kitchen cabinets to allow homeowners to be more comfortable as they are working on the counter-top.
In this regard, what size are kitchen kickboards?
Sometimes called plinths. Kickboards can be ordered as a 2440 x 150mm panel.
Why do cabinets have a toe kick?
A toe kick is a notch-shaped recess at the bottom front of a base cabinet. It provides a recess for your feet so you can get slightly closes to the countertop. This improves your balance,and also reduces the fatigue that would result if you were forced to reach across a countertop to work.
What is the plinth?
Also called: socle the rectangular slab or block that forms the lowest part of the base of a column, statue, pedestal, or pier. Also called: plinth course the lowest part of the wall of a building that appears above ground level, esp one that is formed of a course of stone or brick.
How do you install Kickboards on a kitchen cabinet?
Nail the toe kick board to the base cabinets with finishing nails. Position a nail setter on the head of each finishing nail. Strike the nail setter with the hammer to countersink each finishing nail. Fill each countersunk hole with wood putty that matches the color of your cabinet finish.
What is a plinth in a kitchen?
Plinths. A plinth, or kickboard, is often added along he bottom edge of the base units, to make them appear to stand directly on the floor, and give the kitchen a solid finished look.
How do you remove plinth from kitchen units?
Fashion a hook (like a letter L) from a wire coat hanger, slip this behing the plinth (kick plate) at the top – there should be enough space to slip it in, if not carefully lever a tiny gap with a screwdriver. Once in turn the hook through 90° then pull the plinth should pull away.
How do you remove a kick plate?
How to Remove the Toe Plate on a Dishwasher Inspect the toe kick plate on the bottom of the dishwasher for screws. Remove the toe kick plate screws with a Phillips-head screwdriver or Torx #20 screwdriver. Slide the toe kick plate away from the dishwasher. Locate the access panel just above the toe plate. Lift off the access panel.