What size drawer slides should I use?

Measure from the back of the drawer-front to the end of the drawer box. Only measure the box, do not include the drawer front. Round the measurement off to the lower number on the tape. For example, when the measurement is 22 1/2 inches, you need to purchase 22-inch drawer slides.

Below are some of the most common types of drawer slides.

  • Nylon Roller – These are typically used in conjunction with epoxy-coated steel drawer slide members.
  • Steel Ball Bearing – Often called precision ball bearing slides, these slides offer a superior fit and feel compared to standard nylon rollers slides.

Additionally, how do you measure the drawer width of a slide? Measuring Drawer Slides, Step by Step

  1. Remove the drawer from the cabinet.
  2. Measure the box, not the drawer front.
  3. Measure the width of the drawer and the width of the opening in the cabinet.
  4. Examine the interior of the cabinet and the exterior of the drawer.

Accordingly, how thick are drawer slides?

When sizing drawer slides, check thickness of the assembly, as well as width and length. If the slide is too thin for your cabinet assembly, you’ll have to shim. If it’s too thick, it cannot be used. Light duty slides might be as thin as 1/2″, while heavy duty slides may be over 3/4″ thick.

How much smaller should a drawer be than the opening?

Drawers can be built almost any width for bottom mount, but the most common size is 3/4-inch smaller on both sides than the cabinet opening. For example, if the opening is 12 inches wide, the drawer should be built 10 1/2 inches wide.

How do self closing drawer slides work?

Soft-close slides slow the drawer as it closes, ensuring that it doesn’t slam. Self-closing slides take the concept further and pull the drawer closed with just a gentle press on the drawer front. Touch-release slides do the opposite—with a touch, the drawer pops open; useful for sleek cabinets without pulls.

How do you fix drawer slides with ball bearings?

To fix this problem, you only need a few items, and your ball bearing drawer slides will work like new again. Open the drawer and empty all of the contents. Pull the drawer out and up, taking it out of its recess. Straighten out any kinks or bends in the drawer slides with needle-nose pliers if necessary.

What are the best soft close drawer slides?

Best Soft Close Drawer Slides Review: Side Mount and Undermount Slides Name Rating Shop Amazon Vadania 9.2 Check Price Accuride 8.6 Check Price ROK Adapter 8.4 Check Price Promark/Liberty 7.0